|
|
|
|
|
| ESI-2002
In-Circuit Tester |
|
Features |
|
|
>
Introduction
> Features
> Specification
> Overall Dimensions
|
|
Windows
Based (Windows2000)
ESI-2002 In-Circuit Tester operates on Windows2000. It is easy
to setup for networking with other PC or utilize some other
application. |
|
|
|
High
Speed Inspection
Test speed is about 40% faster as compare to our previous
ESI-202 model. |
|
|
|
|
Exceptional Inspection Accuracy
By using "non-adjustable measurement system (the digital
calibration)", it achieved improvement for absolute and
stable accuracy.
Digital calibration achieved improvement for stabilization of
fluctuation for discrete value by secular change and
temperature change. |
|
|
|
|
|
Include
Total Kelvin measurement as standard equipment
"Total Kelvin Measurement Function" had been
included on ESI-2002 as standard equipment.
*** Require Relay
Card Configuration for this function. |
|
|
|
|
|
Improved
"Charge Test" and "Auto Discharge
Function"
Improved "Auto Discharge Function" for machine
protection from remaining charges stored in capacitor. (16
points/group -> 127 points / group).
Discharge voltage up to 10V. |
|
|
|
|
|
Increased
number of measurement groups
Max. of 128 groups (PCB Cavities) can be tested. |
|
|
|
|
|
Increased
number of measurement steps
Max. of 16,000 test steps (include IC test) are available for
input.
|
|
|
|
|
|
Available
to use our previous fixture & test program
Same fixture size as our previous model (ESI-202) and ESI-202
test program can be used on ESI-2002 (Interactive).
|
|
|
|
|
|
Available
to upgrade from our previous model (ESI-202)
Is is available to upgrade from ESI-202 to ESI-2002.
|
|
|
|
|
|
Delta
Scan - Option
Delta Scan uses the pin protection diodes inside the
digital device to detect the manufacturing fault of device (
eg. Open )
|
|
|
|
|
|
Frame
Scan - Option
Frame Scan uses Capacitive coupling to detect the
manufacturing fault device.
|
|
|
|
|
|
Cap
Scan Test - Option
Cap Scan uses Frame Scan technology to detect the mis-orientation
of polarized capacitor and avoid potential board damage during
power up.
|
|
|
|
|
|
High
Voltage Zener Diode - Option
Available to inspect Zener diode up to 90V.
|
|
|
|
|
|
Function
Testing Unit - Option
By connecting with additional ESF-2002 (Option) and GPIB
interface, it is able to perform "DC Voltage",
"Frequency", "Time Test" and "Time
different" etc.
|
|
|
|
|
|
Others
- Option
Area Sensor
- Protect operator during ICT press down
(front of machine).
Safety Cover - Protect operator during ICT press down
(rear of machine).
One Touch Fixture - For easy handling during fixture
changing.
OK Stamp - OK stamp on passed board by air cylinder or
solenoid.
|
|
|
|
| |
|
|
|
|
Click here for more spec ..... |
|
|
|
|
|
