|
|
|
|
|
|
|
FA-931V
In-Circuit Tester
|
|
Features
|
|
|
> Introduction
> Features
> Specification
> Overall Dimensions
|
|
Find
SMT Opens Fast (Option)
Hp TestJet technology is a complete engineered solution
The first to integrate hardware, software and fixturing in
an unpowered test for open solder joints
|
|
|
|
|
|
PC-Based
Tester
To enhance ease of file manipulation and improve
supporting software compatibility, OKANO FA-931V employs
PC based testing concept, running on MS-DOS 5.0 and above.
The FA-931V system software is very powerful and easily
transportable between any IBM compatible PCs to allow
off-line program editing.
|
|
|
|
|
|
|
HP
TestJet Test Coverage
Digital ICs
Analog / mixed-signal Ics
Through hole
SMT => S014 (plastic, ceramic)
PGA (w / o ground plane)
BGA (OMPACK)
Heat sinks (not ground)
Top-and bottom-side devices
Connectors, sockets, switches
Polarized capacitors (requires HP Polarity Check upgrade)
|
|
|
|
|
|
|
|
Press Down Unit
Side covers and top-bellow are provided to ensure
operator's safety during board handling.
Also supports Dual Press Control which is capable of
testing 2 different PCB models consecutively.
This allows for production flexibility and increases
efficiency.
|
|
|
|
|
|
|
|
Phase Separation
Capabilities
Individual component of parallel circuits consisting of
resistors, capacitors and inductors can be measured by
employing a phase demodulation technique to separate the
reactive, capacitive and inductive component.
|
|
|
|
|
|
|
|
Reliable Relay &
Measurement Cards
OKANO uses specially tested contact relays (burn-in-tests)
for relay card and reed relays for measurement cards to
ensure more reliable and accurate results.
|
|
|
|
|
|
|
|
On-Line Help System
Self explanatory details on all functions incorporated in
system software which can be called up anytime by pressing
Alt+H.
|
|
|
|
|
|
|
|
Password Protection
A programmable password is needed for technician/engineer
entry level into software so as to prevent unauthorized
modification to program test data.
|
|
|
|
|
|
|
|
Self Diagnostic
Program
Relay board check and DC/AC Measurement card check
available to help isolate and identify system failures.
|
|
|
|
|
|
|
|
Management Data
Classified under Every Group, Kind of Fails and Every
Step.
Information on quantity of boards tested, test yield,
throughput (test time/board), component type breakdown to
detailed component failures are collected and can be
printed out for management references.
|
|
|
|
|
|
|
|
Auto Charge Test
Generation
Safety feature which automatically programs detection of
built up voltage for capacitors above 100 uF.
|
|
|
|
|
|
|
|
Stray Capacitance
Cancellation
Capacitance between relays and probes is automatically
eliminated from the measurement and offset to ensure a
more accurate measurement.
|
|
|
|
|
|
|
|
Group Testing
Capable of handling and testing up to 16 groups.
|
|
|
|
|
|
|
|
Step Auto Guarding
Auto select separate point when program editing &
debugging, to get more stable, correctly test value.
|
|
|
|
|
|
|
|
Automatic Discharge
Function
When program is carry out, there are function of auto
voltage detect and auto discharge to improve the accuracy
of testing and protect the relay board been damaged.
|
|
|
|
|
|
|
|
More Test Pin
New FA-931V expand the test pin to 4096 pins, advance to
test more information relate products which need high pin
to test.
|
|
|
|
|
|
|
|
Testing Resistance
Lower Than 1 ohm
When test the resistance lower than 1ohm, auto deduct the
contact resistance (Ro)
It can test low resistance, and test correctly, stable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Click here
for more spec ... |
|
|
|
|
|
